|
Home |
|
Benefits |
|
Objectives |
|
Certification Scheme |
|
Scopes |
|
Members |
|
Contact |
|
News |
|
Documents |
|
Laboratories |
|
LOVAG Mark |
Scope of equipment standards to be used for LOVAG
Updated: 2012-01-16
| Number of Standard | |||||
| IEC | EN or HD | EQUIPMENT | |||
| CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS | |||||
| EN 50085-1 | Part 1: General requirements | ||||
| CONDUIT SYSTEMS FOR CABLE MANAGEMENT | |||||
| IEC 61386-1 | EN 50086-1 | Part 1: General requirements | |||
| IEC 61386-21 | EN 50086-2-1 | Part 2-1: Particular requirements for rigid conduit systems | |||
| IEC 61386-22 | EN 50086-2-2 | Part 2-2: Particular requirements for pliable conduit systems | |||
| IEC 61386-23 | EN 50086-2-3 | Part 2-3: Particular requirements for flexible conduit systems | |||
| IEC 61386-24 | EN 50086-2-4 | Part 2-4: Particular requirement for conduit systems buried underground | |||
| ENVIRONMENTAL TESTING - Part 2: Tests | |||||
| IEC 60068-2-6 | EN 60068-2-6 | Test Fc: Vibration (sinusoidal) | |||
| IEC 60068-2-11 | EN 60068-2-11 | Test Ka Salt mist | |||
| IEC 60068-2-20 | Test T: Soldering | ||||
| IEC 60068-2-27 | EN 60068-2-27 | Test Ea and guidance: Shock | |||
| IEC 60068-2-30 | EN 60068-2-30 | Test Db and guidance: Damp heat, cyclic (12 + 12 hour cycle) | |||
| ELECTRICAL RELAYS | |||||
| IEC 60255-5 | Part 5: Insulation tests for electrical relays | ||||
| IEC 60255-8 | EN 60255-8 | Part 8: Thermal electrical relays | |||
| IEC 60255-12 | Part 12: Directional relays and power relays with two input energizing quantities | ||||
| IEC 60255-13 | Part 13: Biased percentage differential relays | ||||
| LOW VOLTAGE FUSES | |||||
| IEC 60269-1 | EN 60269-1 | Part 1: General requirements | |||
| IEC 60269-2 | EN 60269-2 | Part 2: Supplementary requirements for fuses for use by authorized persons | |||
| IEC 60269-3 | EN 60269-3 | Part 3: Supplementary requirements for fuses for use by unskilled persons for fuses for use by unskilled persons | |||
| IEC 60269-4 | EN 60269-4 | Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices | |||
| PLUGS, SOCKET-OUTLETS COUPLERS FOR INDUSTRIAL PURPOSES | |||||
| IEC 60309-1 | EN 60309-1 | Part 1: General requirements | |||
| IEC 60309-2 | EN 60309-2 | Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories | |||
| LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES | |||||
| IEC 60439-1 | EN 60439-1 | Part 1: Type-tested and partially type-tested assemblies | |||
| IEC 60439-2 | EN 60439-2 | Part 2: Particular requirements for busbar trunking systems (busways) | |||
| IEC 60439-3 | EN 60439-3 | Part 3: Distribution Boards | |||
| IEC 60439-4 | EN 60439-4 | Part 4: Particular requirements for assemblies for construction sites | |||
| IEC 60439-5 | EN 60439-5 | Part 5: Cable distribution cabinets (CDCs) for power distribution networks | |||
| IEC 61439-1 | EN 61439-1 | Part 1: General rules | |||
| IEC 61439-2 | EN 61439-2 | Part 2: Power switchgear and controlgear assemblies | |||
| IEC 61439-5 | EN 61439-5 | Part 5: Assemblies for power distribution in public networks | |||
| IEC 60529 | EN 60529 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES | |||
| SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS | |||||
| IEC 60669-1 | EN 60669-1 | Part 1: General requirements | |||
| IEC 60755 | RESIDUAL CURRENT OPERATED PROTECTIVE DEVICES | ||||
| IEC 60898 | EN 60898 | CIRCUIT BREAKERS FOR OVER CURRENT PROTECTION FOR HOUSEHOLD + SIMILAR | |||
| LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR | |||||
| IEC 60947-1 | EN 60947-1 | Part 1: General rules | |||
| IEC 60947-2 | EN 60947-2 | Part 2: Circuit breakers | |||
| IEC 60947-3 | EN 60947-3 | Part 3: Switches, disconnectors, switch-disconnectors and fuse combination units | |||
| Part 4: Contactors and motor starters | |||||
| IEC 60947-4-1 | EN 60947-4-1 | Sect. 1: Electrotechnical contactors and motor starters | |||
| IEC 60947-4-2 | EN 60947-4-2 | Sect. 2: AC semicontactor motor controllers and starters | |||
| IEC 60947-4-3 | EN 60947-4-3 | Sect. 3: AC semicontactor controllers and contactors for non-motor loads | |||
| Part 5: Control circuit devices and switching elements | |||||
| IEC 60947-5-1 | EN 60947-5-1 | Sect. 1: Electromechanical control circuit devices | |||
| IEC 60947-5-2 | EN 60947-5-2 | Sect. 2: Proximity switches | |||
| IEC 60947-5-5 | EN 60947-5-5 | Sect. 5: Electrical emergency stop devices with mechanical latching function | |||
| IEC 60947-5-6 | EN 60947-5-6 | Sect. 6: DC interface for proximity sensors and switching amplifiers (NAMUR) | |||
| IEC 60947-5-8 | Sect. 8: Enabling control devices | ||||
| IEC 60947-5-9 | Sect. 9: Flow rate switches | ||||
| Part 6: Multiple function equipment | |||||
| IEC 60947-6-1 | EN 60947-6-1 | Sect. 1: Automatic transfer switching equipment | |||
| IEC 60947-6-2 | EN 60947-6-2 | Sect. 2: Control and protective switching devices (CPS) | |||
| Part 7: Ancillary Equipment | |||||
| IEC 60947-7-1 | EN 60947-7-1 | Sect. 1: Terminal blocks for copper conductors | |||
| IEC 60947-7-2 | EN 60947-7-2 | Sect. 2: Protective conductor terminal blocks for copper conductors | |||
| IEC 60947-7-3 | EN 60947-7-3 | Sect. 3: Ancillary equipment - Safety requirements for fuse terminal blocks | |||
| RESIDUAL CURRENT CIRCUIT-BREAKERS FOR HOUSEHOLD AND SIMILAR USE (RCCBs) | |||||
| IEC 61008-1 | EN 61008-1 | Part 1: General rules | |||
| IEC 61008-2-1 | EN 61008-2-1 | Part 2-1: Applicability of the general rules to RCCB's functionally independent of line voltage | |||
| IEC 61008-2-2 | Part 2-2: Applicability of the general rules to RCCB's functionally dependent on line voltage | ||||
| RESIDUAL CURRENT CIRCUIT-BREAKERS HOUSEHOLD AND SIMILAR (RCCOBs) | |||||
| IEC 61009-1 | EN 61009-1 | Part 1: General rules | |||
| IEC 61009-2-1 | EN 61009-2-1 | Part 2-1: Applicability of the general rules to RCBO's functionally independent of line voltage | |||
| IEC 61009-2-2 | Part 2-2: Applicability of the general rules to RCBO's functionally dependent on line voltage | ||||
| IEC 61095 | EN 61095 | ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES | |||
| PROGRAMMABLE CONTROLLERS | |||||
| IEC 61131-1 | EN 61131-1 | Part 1: General information | |||
| IEC 61131-2 | EN 61131-2 | Part 2: Equipment requirements | |||
| SAFETY OF TRANSFORMERS POWER SUPPLY UNITS AND SIMILAR | |||||
| IEC 61558-1 | EN 61558-1 | Part 1: General requirements and tests | |||
| IEC 61558-2-1 | EN 61558-2-1 | Part 2-1: Particular requirements for separating transformers for general use | |||
| IEC 61558-2-4 | EN 61558-2-4 | Part 2-4: Particular requirements for isolating transformers for general use | |||
| IEC 61558-2-6 | EN 61558-2-6 | Part 2-6: Particular requirements for safety isolating transformers for general use | |||
| SPECIFIED TIME RELAYS FOR INDUSTRIAL USE | |||||
| IEC 61812-1 | EN 61812-1 | Part 1: Requirements and tests | |||
| ELECTRIC VEHICLE CONDUCTIVE CHARGING System | |||||
| IEC 61851-1 | EN 61851-1 | Part 1: General requirements | |||
| IEC 61851-22 | EN 61851-22 | Part 22: AC electric vehicle charging station | |||
| ELECTROMAGNETIC COMPATIBILITY (EMC) | |||||
| Part 3: Limits | |||||
| IEC 61000-3-2 | EN 61000-3-2 | Part 3-2: Limits for harmonic current emission (equipment input current <= 16 A per phase) | |||
| IEC 61000-3-3 | EN 61000-3-3 | Part 3-3: Limitation of voltage changes, voltage fluctuations flicker in public low voltage supply systems, for equipment with rated current <= 16 A per phase and not subjected to conditional connection | |||
| Part 4: Testing and measurement techniques | |||||
| IEC 61000-4-2 | EN 61000-4-2 | Part 4-2: Electrostatic discharge immunity test | |||
| IEC 61000-4-3 | EN 61000-4-3 | Part 4-3: Radiated radio frequency, electromagnetic field immunity | |||
| IEC 61000-4-4 | EN 61000-4-4 | Part 4-4: Electrical fast transient/burst | |||
| IEC 61000-4-5 | EN 61000-4-5 | Part 4-5: Surge immunity test | |||
| IEC 61000-4-6 | EN 61000-4-6 | Part 4-6: Immunity to conducted disturbances, induced by radio-frequency fields | |||
| IEC 61000-4-8 | EN 61000-4-8 | Part 4-8: Power frequency magnetic field immunity test | |||
| IEC 61000-4-9 | EN 61000-4-9 | Part 4-9: Pulse magnetic field immunity test | |||
| IEC 61000-4-10 | EN 61000-4-10 | Part 4-10: Damped oscillator magnetic field immunity test | |||
| IEC 61000-4-11 | EN 61000-4-11 | Part 4-11: Voltage dips, short interruptions and voltage variation immunity tests | |||
| Part 6: Generic standards | |||||
| IEC 61000-6-3 | EN 61000-6-3 | Part 6-3: Generic standards -Emission standard for residential commercial and light industrial environments | |||
| IEC 61000-6-4 | EN 61000-6-4 | Part 6-4: Generic standards -Emission standard for industrial environments | |||
| ELECTRICAL ACCESSORIES- CIRCUITBREAKER AND SIMILAR EQUIPMENT FOR HOUSEHOLD USE | |||||
| IEC 62019 | EN 62019 | Auxiliar contact units | |||
| Empty enclosures for low-voltage switchgear and controlgear assemblies | |||||
| IEC 62208 | EN 62208 | General requirements | |||
| Remark: |
Grey-shodowed Standards: |
These standards are not used for granting LOVAG Mark Licences | |||